Products | FEFCO CRANESYSTEMS PRIVATE LIMITED, India

Ahmedabad 08048028869 info@fefco.in

Chat with us

Preview

This is your website preview.

Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.

Manufacturing test

The wall mounted jib cranes do not take any floor space and do not need special foundations. The cantilever is fixed on the wall or concrete post, and the rotation can be customized. The jib cranes are widely used in workshop, storage and ports, etc.Type:BXLifting Capacity:0.25 to 10 tonLifting Height:3m to 6 tonSpan:10mWorking Duty: CLASS 2

WALL MOUNTED JIB CRANE

INR 72000 INR 80000
You Save 10%

Vertical Movement by Electric Hoist: Depending on the requirement a choice is made for an electric chain hoist or an electric wire rope hoist.Horizontal and Lateral Movement: Horizontal movement in a crane can be achieved through the motion over or below the bridge depending on the number of girders. The lateral movement of a crane depends on the type of the crane i.e EOT crane or Under Slung Crane.Stability: Stability is an important factor for the working of the crane. A crane is stable when the sum of all movements about the base equal zero. Generally, the 1.25 Factor of Safety is considered during the designing of a Crane. The Safe working load limit of a crane is Mentioned on both sides of the Cranes as S.W.L Capacity.

ELECTRIC WIRE ROPE HOIST

INR 45000 INR 50000
You Save 10%

Worm Type / L-Type Winch CAPACITY : 1 Ton to 20 TonLIFTING : 6 M to 20 MIS 3177 / IS 807 (For design, Manufacturing& TestingCapacity : 5 Ton to 2 TonLift : 6 m to 25 m

ELECTRIC WINCH MACHINE

INR 255000 INR 260000
You Save 1.92%

Construction winch is commonly used in various engineering projects on land and along the coast to lift or pull heavy loads. It is mainly designed to be electrically driven, and can also be customized into hydraulic winches and diesel winches depending on your requirements. Due to simple operation, good versatility, large capacity and easy displacement, winch equipment is a cost-effective solution for material lifting or pulling in construction, water conservancy projects, forestry, mines, docks, etc.

CONSTRUCTION WINCH

INR 81000 INR 90000
You Save 10%

1) Winch is a Machine used for lifting material.2) It is mostly used in Construction industries, Lifts, pulling application and where lifting height is more than wire rope hoist range.3) IS 3177/IS 807 (For design Manufacturing & Testing)4) Capacity : 5 ton to 20 ton5) Lift 6 m to 25 m

I TYPE WINCH MACHINE

INR 54000 INR 60000
You Save 10%

Product DescriptionFEFCO offers Crane Bottom Hook Block Assembly, as per need of customers in various capacity and sizes. Crane Bottom Hook Block Assembly is supplied in Capacity 500kg, 1ton, 2ton, 3ton, 5ton, 6ton, 7.5ton, 8ton, 10ton, 12.5ton, 15ton, 20ton, 25ton, 30ton, 40ton, 50ton, up to 100ton to suit Cranes in Foundry, Steel, Engineering, Chemical, Heavy Machinery, Port applications. Crane Bottom Hook Block Assembly is manufactured as per Crane capacity, lifting load, crane wire rope size, crane rope sheave pulley and application. For Safety Working Load, Crane Bottom Hook Block Assembly is also subjected to load test in a Government approved Test House under DOCK WORKERS (SAFETY, HEALTH AND WELFARE) REGULATIONS, 1990 and a Test Certificate is issued. In addition, Crane hook, Crane hook (machined) with nut, Crane Safety latch, Crane rope sheave pulley is also supplied for Crane Bottom Hook Block Assembly. Crane Bottom Hook Block Assembly is supplied for replacement to suit various make of EOT Cranes such as Anupam Crane, Amsak crane, Armsel crane, Apex crane, Atlas crane, Ankit Crane, Abus Crane, Cranetech Crane, Cranex Crane, Demag Crane, Dynamech Crane, DC Hoist Crane, Electromech Crane, Eddy Crane, Elmech Crane, Esquare Crane, Forum Crane, Grip Cranes, GH Cranes, Hercules Crane, HAFA Crane, INDEF Crane, Intelle Crane, K2 Crane, Krans Crane, Loadmate Crane, Magna Crane, MM Crane, Mukand Crane, Mega Crane, NE Crane, Powermech Crane, Reva Crane, Recmann Crane, Sigma Crane, Sun Crane, Swaraj Crane, Street Crane, SL Crane, Sri Pranav Crane, Stahl Crane, Unicon Crane, Viralishanmuga Crane, WMI Crane, Unitech Crane.

HOOK ASSEMBLY

INR 45000 INR 50000
You Save 10%

OVERVIEWEnd carriage wheel kits, is an essential parts for top run end carriage, it includes geard wheels, plain wheels, shafts(axles), bearings, spacers and keepers.Which is also called end carriage wheels, crane wheels, wheel kits, end truck wheels, end truck wheel kits, steel crane wheels.Crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill,cement plant, fertilizer plant, paper mill, chemical industries etc.Forged crane wheels are available in crane potation hardness up to 40 Rc including our standard heat treatments.Crane wheels are also able to be deep hardened for heavy wear or load requirements.

L BLOCK TYPE WHEEL ASSEMBLY

INR 27000 INR 30000
You Save 10%

OVERVIEWEnd carriage wheel kits, is an essential parts for top run end carriage, it includes geard wheels, plain wheels, shafts(axles), bearings, spacers and keepers.Which is also called end carriage wheels, crane wheels, wheel kits, end truck wheels, end truck wheel kits, steel crane wheels.Crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill,cement plant, fertilizer plant, paper mill, chemical industries etc.Forged crane wheels are available in crane potation hardness up to 40 Rc including our standard heat treatments.Crane wheels are also able to be deep hardened for heavy wear or load requirements.

OPEN TYPE WHEEL ASSEMBLY

INR 9000 INR 10000
You Save 10%

Under slung End Carriage is to support and direct the crane and girder at the end of the girder.Girder is fixed on Under slung End Carriage and can be used for single and double girder Crane bothUnder slung End Carriage is used for 1- 20 m span range and 1-5 ton Capacity RangeL-block End Carriage Can be available with SEW and Local Motor

UNDERSLUNG TYPE END CARRIAGE

INR 54000 INR 60000
You Save 10%

Main parameters of the overhead end carriageCapacity : 1 to 20 tMax. Span: 3 to 27mTraveling Motor Output (kW × 2): 0.21/0.25 to 1.25/1.5 x 2 m/min (50/60 Hz)Features of overhead end carriageTo meet customer needs, we have enhanced performance while offering more standardized models.The track wheel is now made of carbon steel, making it sturdier and longer-lasting.Products are primer-coated, which allows customers to choose the desired top coat color.Punch-mark on end carriages for easy centering and drilling for girders. Features of end carriages with wheel heads: Supported and suspended end carriages, boogies and standardized wheel heads for bridge cranes, gantries and semi gantry cranes. Single girder / double girder, transfer carts and other type of applications.Powered by motor-gearboxes which are designed exclusively for use on cranes and lifting machinery. Also is possible to install commercial motor-gearboxes.Wide range of diameters, wheel bases, and wheel channels.End Carriages Module design.Maintenance-free crane special frequency converting three-in-one; Adjustable wheel set with less rail gnawing (patent).Wear resistant and impact resistant alloy forged wheel.High-precision one-step wholistic processing; High strength and flexibility low alloy material.Features of end carriages with wheel heads:Supported and suspended end carriages, boogies and standardized wheel heads for bridge cranes, gantries and semi gantry cranes. Single girder / double girder, transfer carts and other type of applications.Powered by motor-gearboxes which are designed exclusively for use on cranes and lifting machinery. Also is possible to install commercial motor-gearboxes.Wide range of diameters, wheel bases, and wheel channels.End Carriages Module Design.Exposed drive with large rations and small size.Steady and reliable crane special soft start with three-in-one structure.High-precision one-step wholistic processing.Modular design, flexible assembly.

EUROPEN TYPE

INR 36000 INR 40000
You Save 10%

Product DescriptionSpecifications 1. Overhead Crane Self-Designed End Carriage/End Truck2. For overhead crane, gantry crane Overhead Crane Self-Designed End Carriage/End Truck, Electric End Carriage Steel Crane Wheels For Overhead Crane 1ton ~ 100ton. 1~100T crane trolley-end carriageIndependently driven.for single girder & double girder.Low repair rate.Tough material, high safety. Nante has successfully developed crane kits systems for all kinds of overhead cranes. We are committed to provide our quality service though operational excellence and technology improvement. A wide range of Crane End Carriage is available for customers' choice. They are designed for single girder crane, double girder crane range from 1~50ton(standard), other capacity can be customized.With the backup of high quality manufacturing facilities and solid technological strength, we have been pursuing for nearly two decades the service principle of

OPEN TYPE

INR 52000 INR 55000
You Save 5.45%

OVERVIEWEnd carriage made of rectangular tube, transmission mechanism use gear reducer motor, equipped with the open pinion wheel or hollow shaft wheel. Suitable for single girder or double girder overhead crane. Wheel tread surface heat treatment.It only need to weld the main beam and end beam after correction. Making crane manufacturing, installation and maintenance very easily.European type End carriage adopts F-series reducer and hollow shaft drive, working duty reach M5.DETAILS1.Motorized trolley accessory of craneRespective dollies in the system are independently driven.2.A structure is composed of track, side track for horizontal movement, trunplate and other sections, and form a 3D networkfor material conveyance.3.Multipe control mechanism, able for centralized control, scattered control, or distributed control mode, and the dollies areable to perform fullautomatic operations according to the set program.4.Random material supply system for random applications for vehicle request by service positions to be made throughcharacteristic address code of service positions through dollies, for them to directly reach the stations where vehiclesrequested for material supply.5.Sorting and dsitributing system for carrying dollies to set address reading stations on the ground according to thecharacteristic address code carried by different types of carried cargos, able to achieve automatic sorting and distributingoperations and so on.

L BLOCK TYPE

INR 72000 INR 80000
You Save 10%

Filter using tags

The wall mounted jib cranes do not take any floor space and do not need special foundations. The cantilever is fixed on the wall or concrete post, and the rotation can be customized. The jib cranes are widely used in workshop, storage and ports, etc.Type:BXLifting Capacity:0.25 to 10 tonLifting Height:3m to 6 tonSpan:10mWorking Duty: CLASS 2

WALL MOUNTED JIB CRANE

INR 72000 INR 80000
You Save 10%

Vertical Movement by Electric Hoist: Depending on the requirement a choice is made for an electric chain hoist or an electric wire rope hoist.Horizontal and Lateral Movement: Horizontal movement in a crane can be achieved through the motion over or below the bridge depending on the number of girders. The lateral movement of a crane depends on the type of the crane i.e EOT crane or Under Slung Crane.Stability: Stability is an important factor for the working of the crane. A crane is stable when the sum of all movements about the base equal zero. Generally, the 1.25 Factor of Safety is considered during the designing of a Crane. The Safe working load limit of a crane is Mentioned on both sides of the Cranes as S.W.L Capacity.

ELECTRIC WIRE ROPE HOIST

INR 45000 INR 50000
You Save 10%

Worm Type / L-Type Winch CAPACITY : 1 Ton to 20 TonLIFTING : 6 M to 20 MIS 3177 / IS 807 (For design, Manufacturing& TestingCapacity : 5 Ton to 2 TonLift : 6 m to 25 m

ELECTRIC WINCH MACHINE

INR 255000 INR 260000
You Save 1.92%

Construction winch is commonly used in various engineering projects on land and along the coast to lift or pull heavy loads. It is mainly designed to be electrically driven, and can also be customized into hydraulic winches and diesel winches depending on your requirements. Due to simple operation, good versatility, large capacity and easy displacement, winch equipment is a cost-effective solution for material lifting or pulling in construction, water conservancy projects, forestry, mines, docks, etc.

CONSTRUCTION WINCH

INR 81000 INR 90000
You Save 10%

1) Winch is a Machine used for lifting material.2) It is mostly used in Construction industries, Lifts, pulling application and where lifting height is more than wire rope hoist range.3) IS 3177/IS 807 (For design Manufacturing & Testing)4) Capacity : 5 ton to 20 ton5) Lift 6 m to 25 m

I TYPE WINCH MACHINE

INR 54000 INR 60000
You Save 10%

Product DescriptionFEFCO offers Crane Bottom Hook Block Assembly, as per need of customers in various capacity and sizes. Crane Bottom Hook Block Assembly is supplied in Capacity 500kg, 1ton, 2ton, 3ton, 5ton, 6ton, 7.5ton, 8ton, 10ton, 12.5ton, 15ton, 20ton, 25ton, 30ton, 40ton, 50ton, up to 100ton to suit Cranes in Foundry, Steel, Engineering, Chemical, Heavy Machinery, Port applications. Crane Bottom Hook Block Assembly is manufactured as per Crane capacity, lifting load, crane wire rope size, crane rope sheave pulley and application. For Safety Working Load, Crane Bottom Hook Block Assembly is also subjected to load test in a Government approved Test House under DOCK WORKERS (SAFETY, HEALTH AND WELFARE) REGULATIONS, 1990 and a Test Certificate is issued. In addition, Crane hook, Crane hook (machined) with nut, Crane Safety latch, Crane rope sheave pulley is also supplied for Crane Bottom Hook Block Assembly. Crane Bottom Hook Block Assembly is supplied for replacement to suit various make of EOT Cranes such as Anupam Crane, Amsak crane, Armsel crane, Apex crane, Atlas crane, Ankit Crane, Abus Crane, Cranetech Crane, Cranex Crane, Demag Crane, Dynamech Crane, DC Hoist Crane, Electromech Crane, Eddy Crane, Elmech Crane, Esquare Crane, Forum Crane, Grip Cranes, GH Cranes, Hercules Crane, HAFA Crane, INDEF Crane, Intelle Crane, K2 Crane, Krans Crane, Loadmate Crane, Magna Crane, MM Crane, Mukand Crane, Mega Crane, NE Crane, Powermech Crane, Reva Crane, Recmann Crane, Sigma Crane, Sun Crane, Swaraj Crane, Street Crane, SL Crane, Sri Pranav Crane, Stahl Crane, Unicon Crane, Viralishanmuga Crane, WMI Crane, Unitech Crane.

HOOK ASSEMBLY

INR 45000 INR 50000
You Save 10%

OVERVIEWEnd carriage wheel kits, is an essential parts for top run end carriage, it includes geard wheels, plain wheels, shafts(axles), bearings, spacers and keepers.Which is also called end carriage wheels, crane wheels, wheel kits, end truck wheels, end truck wheel kits, steel crane wheels.Crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill,cement plant, fertilizer plant, paper mill, chemical industries etc.Forged crane wheels are available in crane potation hardness up to 40 Rc including our standard heat treatments.Crane wheels are also able to be deep hardened for heavy wear or load requirements.

L BLOCK TYPE WHEEL ASSEM

INR 27000 INR 30000
You Save 10%

OVERVIEWEnd carriage wheel kits, is an essential parts for top run end carriage, it includes geard wheels, plain wheels, shafts(axles), bearings, spacers and keepers.Which is also called end carriage wheels, crane wheels, wheel kits, end truck wheels, end truck wheel kits, steel crane wheels.Crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill,cement plant, fertilizer plant, paper mill, chemical industries etc.Forged crane wheels are available in crane potation hardness up to 40 Rc including our standard heat treatments.Crane wheels are also able to be deep hardened for heavy wear or load requirements.

OPEN TYPE WHEEL ASSEMBLY

INR 9000 INR 10000
You Save 10%

Under slung End Carriage is to support and direct the crane and girder at the end of the girder.Girder is fixed on Under slung End Carriage and can be used for single and double girder Crane bothUnder slung End Carriage is used for 1- 20 m span range and 1-5 ton Capacity RangeL-block End Carriage Can be available with SEW and Local Motor

UNDERSLUNG TYPE END CARR

INR 54000 INR 60000
You Save 10%

Main parameters of the overhead end carriageCapacity : 1 to 20 tMax. Span: 3 to 27mTraveling Motor Output (kW × 2): 0.21/0.25 to 1.25/1.5 x 2 m/min (50/60 Hz)Features of overhead end carriageTo meet customer needs, we have enhanced performance while offering more standardized models.The track wheel is now made of carbon steel, making it sturdier and longer-lasting.Products are primer-coated, which allows customers to choose the desired top coat color.Punch-mark on end carriages for easy centering and drilling for girders. Features of end carriages with wheel heads: Supported and suspended end carriages, boogies and standardized wheel heads for bridge cranes, gantries and semi gantry cranes. Single girder / double girder, transfer carts and other type of applications.Powered by motor-gearboxes which are designed exclusively for use on cranes and lifting machinery. Also is possible to install commercial motor-gearboxes.Wide range of diameters, wheel bases, and wheel channels.End Carriages Module design.Maintenance-free crane special frequency converting three-in-one; Adjustable wheel set with less rail gnawing (patent).Wear resistant and impact resistant alloy forged wheel.High-precision one-step wholistic processing; High strength and flexibility low alloy material.Features of end carriages with wheel heads:Supported and suspended end carriages, boogies and standardized wheel heads for bridge cranes, gantries and semi gantry cranes. Single girder / double girder, transfer carts and other type of applications.Powered by motor-gearboxes which are designed exclusively for use on cranes and lifting machinery. Also is possible to install commercial motor-gearboxes.Wide range of diameters, wheel bases, and wheel channels.End Carriages Module Design.Exposed drive with large rations and small size.Steady and reliable crane special soft start with three-in-one structure.High-precision one-step wholistic processing.Modular design, flexible assembly.

EUROPEN TYPE

INR 36000 INR 40000
You Save 10%

Product DescriptionSpecifications 1. Overhead Crane Self-Designed End Carriage/End Truck2. For overhead crane, gantry crane Overhead Crane Self-Designed End Carriage/End Truck, Electric End Carriage Steel Crane Wheels For Overhead Crane 1ton ~ 100ton. 1~100T crane trolley-end carriageIndependently driven.for single girder & double girder.Low repair rate.Tough material, high safety. Nante has successfully developed crane kits systems for all kinds of overhead cranes. We are committed to provide our quality service though operational excellence and technology improvement. A wide range of Crane End Carriage is available for customers' choice. They are designed for single girder crane, double girder crane range from 1~50ton(standard), other capacity can be customized.With the backup of high quality manufacturing facilities and solid technological strength, we have been pursuing for nearly two decades the service principle of

OPEN TYPE

INR 52000 INR 55000
You Save 5.45%

OVERVIEWEnd carriage made of rectangular tube, transmission mechanism use gear reducer motor, equipped with the open pinion wheel or hollow shaft wheel. Suitable for single girder or double girder overhead crane. Wheel tread surface heat treatment.It only need to weld the main beam and end beam after correction. Making crane manufacturing, installation and maintenance very easily.European type End carriage adopts F-series reducer and hollow shaft drive, working duty reach M5.DETAILS1.Motorized trolley accessory of craneRespective dollies in the system are independently driven.2.A structure is composed of track, side track for horizontal movement, trunplate and other sections, and form a 3D networkfor material conveyance.3.Multipe control mechanism, able for centralized control, scattered control, or distributed control mode, and the dollies areable to perform fullautomatic operations according to the set program.4.Random material supply system for random applications for vehicle request by service positions to be made throughcharacteristic address code of service positions through dollies, for them to directly reach the stations where vehiclesrequested for material supply.5.Sorting and dsitributing system for carrying dollies to set address reading stations on the ground according to thecharacteristic address code carried by different types of carried cargos, able to achieve automatic sorting and distributingoperations and so on.

L BLOCK TYPE

INR 72000 INR 80000
You Save 10%

Page 1 out of 2.33

automatic chain hoist |best electric chain hoist |chain hoist |chain hoist maintenence |chain hoist manufacturer |electric chain block hoist |electric chain hoist |electric chain hoist 1 ton |electric chain hoist india |electric chain hoist manufacturer |electric chain hoist manufacturer in india |electric chain hoist motorised trolley |electric chain hoist price india |electric chain hoist prices |electric chain hoist supplier |electric chain hoist trolley |electric chain hoist with motorised trolley |electric hoist |electric hoist manufacturer |power hoist |eot crane |crane |crane inspection |crane safety |double girder eot crane |overhead crane design |overhead crane |Chain Hoist |hoist |material handling equipment |Mono Rail Hoist |Wire rope Hoist For Curvature Path Specification: |Hoist |Wire rope Hoist For Curvature Path |hOIST |Wire Rope Hoist manufacturers, Supplier, Exporter |Wire Rope Hoist |fefco hoist |hoist in ahmedabad |jib crane |jib cranes |1 to 20 Ton Hoist |Wire Rope Hoist manufacturers, Supplier, Exporter |wire

Have any question or need any business consultation?

Have any question or need any business consultation?